The main differences between the 1st gen Trio and upgrade Trio is the Tri-screen all-in-one design, optional magnets, built-in kickstand, thinner & lighter, updated hinge design, and larger display on the base model (12.5 vs 13.3-inches).

Yes! Compatible with macOS, Windows, Android smartphones and Nintendo Switch Chromebook

Yes! Each unit comes with 2 screens, unlike the 1st gen.

Directly connect two Trio monitors to two USB ports on the computer and they will work as two additional screens. The laptop screen will remain unchanged and act as a third screen,

If your computer has a USB-C port with DisplayPort enabled (this is built into the computer), the TRIO will be plug-and-play. Otherwise additional drivers will be needed to use the Trio.

No, unless you are performing intensive graphical processes (gaming, streaming, video processing) on more than one monitor at a time.

They plug in separately. Just leave one unplugged.

No, many people believe a common misconception that magnets can harm all display devices. However, this is a myth. In reality, the majority of display types can withstand the presence of magnets without any damage. Only CRTs (Cathode Ray Tubes) are susceptible to magnet interference, as they incorporate a built-in magnet to control electrons. Modern displays, such as LCDs and OLEDs, are entirely safe from magnets and won't be affected by their presence.

Trio monitors are powered by USB. It works when connecting your laptop’s USB port. Plug and play with usb c ports

No, it is display monitor when you mount it to the laptop so that touch screen is not necessity whereas it would increase the cost.

First, connect the Switch power cable to the monitor, make sure it is plugged into the charging port.
Now, connect the switch.

Right click on your desktop while Trio is connected and choose “Display Setting”. Click on the “Duplicate these displays” drop down box. When the dropdown box is opened, choose “Extend these displays”. Then click “Apply”. Now you are in Extend Mode.

Plug your monitor, go to “System Preferences- Display-Arrangement”, uncheck the “Mirror Displays” box. For Catalina user using USB A port, if you want to use your screen on the left side, please download the driver but not DisplayLink Manager App.